Restore a headlight lens to like-new context.
Prior to the mid 1980s, vehicles used glass sealed beam headlights. Provided you wanted to restore a damaged or stupid headlight lens, you went to your community reduction or Car parts store and paid a meagre dollars for a replacement bulb. On account of that bit most vehicles annex come guideline with plastic headlight assemblies that blend into the surrounding oppose office for a smooth gun. To interchange one of these headlights can be indubitable expensive, nevertheless there are ways to bring a cloudy, stupid headlight lens back to breath.
Instructions
1. Mingle a little proportions of motorcar wash notion in a bucket of flushed imbue. Disinfected the headlight lens thoroughly with the soapy hose and a sponge. Rinse with Disinfected aqua.
2. Mask enclosing the headlight with painter's tape to protect any surrounding painted areas or chrome trim from damage. Soak pieces of 600, 1200, and 2000 grit sandpaper in a bucket of bathe for Fifteen minutes; this makes the sandpaper easier to assignment with.
3. Wet the headlight lens with Disinfected H2O and a sponge. Sand the lens with the Six hundred grit paper in a back and forth flow. Avoid using a Hand-bill movement as this may concession swirl marks in the lens. Sand the all-inclusive surface of the lens. Keep the sandpaper and the surface of the lens wet while sanding.
4. Follow up using One thousand two hundred and then Two thousand grit sandpaper in the same fashion. Sand in the same direction as you did previously. Rinse the lens with clear water and dry with a towel.
5. Attach a foam polishing pad to a power drill that has a variable or slow setting. Apply a few small dabs of plastic polish (available from auto parts stores) to the pad. Hold the pad gently against the lens and turn the drill on to its slowest setting. Cover the entire surface of the lens. Keep the drill moving back and forth; staying in one spot for too long may generate too much heat and discolor or melt the lens.
Wipe the haze off with a micro polishing cloth.6. Remove the painter's tape. Wipe the polish from the lens with a micro polishing cloth. Apply a coat of automotive wax to the lens.
