You can a sunroof to your vehicle much after shop for.
On a ardent time, a sunroof in your machine can administer a comfortable, nippy breeze. Nevertheless, not all cars are manufactured with sunroofs as a guideline possibility, so some Car owners choose to install them on their own as an aftermarket embellishment. With some period, patience and the deserved tools, the do-it-yourselfer can install a non-motorized sunroof on most vehicles
Instructions
1. Assess the competence of your vehicle to sustain a sunroof installation by fundamental examining the roof of the vehicle from the inside and away. Trial the placement of wires and clear fixtures and assess if they Testament be in the fashion of the sunroof and provided they can be safely moved. Holding a Stare at your vehicle's owner's tome for any diagrams that may relieve you to deposit the sunroof.
2. Buy a sunroof tools that is specifically designed for your vehicle, or a common advantage sunroof that is the fit proportions for your vehicle.
3. Degree the environment available for sunroof installation, using the template in the sunroof installation tools. Location the earth with the non-permanent marker. Take care to avoid "sawing" with the razor blade, instead cutting through small portions at a time and, if necessary, going over the cuts several times.6. Place the inner and outer frames of the sunroof installation kit in the hole you have cut in your vehicle's roof, making certain that they take on a snug fit without any buckling or bowing. Next, place the trim molding inside of the frames, along with the Styrofoam inserts and the flat ring that will hold the glass.
Once the hole has been cut, be certain to go over the hole, trimming away any jagged pieces that may stick out.
5. Cut into the headliner of your vehicle using the razor blade. Booty the terminals off of the battery to prevent shock in the appearance you shorten over a wire.4. Cut the opening in your vehicle's roof with the saw, carefully following the recommended cutting lines from the sunroof template kit. Start the cutting by drilling holes along the cut line, and then insert the saw in the drilled holes to start cutting.
7. Place the sunroof glass inside the flat ring of the sunroof frame, checking the latching of the glass and the actual fit of the overall installation.
8. Remove the sunroof glass and disassemble the kit down to the frames, so that you can place the weather stripping around the cut hole under the frames. Fill any space between the weather stripping and the frames with caulking and reinstall the kit, this time tightening the screws to the kit.
