Lower the floor jack To admit the vehicle to sit on the jack stand, and move the floor jack out of the way.3. Locate the starter motor under the engine. On most vehicles it will be mounted against the transmission housing. Removing the starter Engine yourself saves you the generation and banknote of having a mechanic remove it for you.
Instructions
1. Unfasten the balky battery cable of the vehicle from the battery publicize with an open-end wrench. Lay a wood block carry on one of the rear tires to detain the vehicle from rolling.
2. Lift the front passenger side of the vehicle with a floor jack and country a jack stand under the jack mark along the frame castigate nearest the front passenger side of the vehicle.The starter Engine of your car is designed to turn the flywheel and move the engine firing to receive your engine to fall. The starter Engine was invented to interchange the plam cranks of the early combustion engines. Removing the starter Engine of your vehicle is a afafir that you can discharge in approximately a half period.
It's a cylindrical component, generally in a steel housing that's about Eight inches long and not quite as wide. Detach the electrical wires connected to the starter with a socket wrench, taking the nuts off the starter posts and moving the wires out of the way.
4. Unfasten the bolts that are securing the starter motor to the transmission housing with a socket wrench. Slide the starter motor off the bolts by hand and remove it from under the engine compartment. Be careful; it's heavy.
