The Hyundai Sonata is a market price packed vehivle with lots of interior room and amenities for the bucks. Changing outside the fresh stereo in the Hyundai Sonata requires removing a quota of the sprint, which is easier than it sounds. With the ethical parts, this project takes less than an generation and leaves you with even improved sound.
Instructions
1. Cleared the coin holder and remove the two screws at the front. Pry the trim from encircling the gear lever lever and unhook the influence wire to the cigarette lighter.
2. Fix and remove the two screws from the backside of the radio trim panel. Connect the wiring harness adaptor to the original harness.5. Slide the new head unit into the Hyundai radio adaptor kit.
Locate the four screws at the front and sides of the stereo and remove them.
4. Pull the stereo out of the Hyundai Sonata dash and disconnect the wires from the back of the unit. Look for the screws, attached to a rod, below the glove box. Unhook the cable from the rod and pull the rod free.3. Place the shifter into "D" and slide the radio trim panel away from the dash.
Attach the wiring harness adaptor and antenna wire to the back of the new head unit and push the entire assembly into the dash.
6. Secure the stereo in place with the four front and side screws and turn it on. Verify all of the speakers and features are working. Reattach the radio trim panel, insert the rod back into cable assembly and secure the trim around the gear shift.
