Note that you are NOT attaching the black clamp to the Saturn's negative terminal. Don't attach it near moving engine parts.8.
Directions for jumping a vehivle battery must be followed closely to prevent shock, damage to the vehicles' electronics, acid burns and an explosion from battery gases that could foundation blindness.
Instructions
1. Proof that the battery of the other vehicle is Twelve volts; otherwise, jumping your Saturn's battery off of it could damage both vehicles.
2. Arena the cars closely Sufficiently that the jumper cables spread between batteries, nevertheless not so rapid that the cars touch; otherwise, you could end improper grounding.
3. Turn off your Saturn's radio, air conditioner, headlights, cigarette lighters and other electrical accessories; otherwise, their electronics could be damaged when the electrical manner is jumped.
4. Turn off both vehicle's ignition.
5. Attach one cardinal jumper cable clamp to the Saturn battery's actual (+) terminal. Remove the terminal include fundamental, provided there is one. Then attach the other copper clamp to the other motorcar's clear-cut terminal.
6. Connect the comparable ebony clamp to the other automobile's antagonistic (-) terminal.
7. Attach the other black clamp to an unpainted metal surface at least Eighteen inches away from your Saturn's battery.Charge a Saturn's Van BatteryYour Saturn's engine automatically recharges the battery after ignition. To manually charge a battery as well feeble to begin the ignition, the principles avenue is to receive a hop from another van.
Start the other car.
9. Press UNLOCK on your key fob to disarm the car alarm.
10. Start the Saturn. If it doesn't start after several tries, it probably needs servicing.
11. Disconnect the jumper cables in the correct order; otherwise, you can damage both vehicles. Disconnect the black negative clamp from the Saturn, then the black negative clamp from the other car, then the red positive clamp from the other car, then the red positive clamp from the Saturn.
