Hold the sprayer Twelve inches from the surface and move left and right, not up and down. Let each coat dry for Ten minutes before spraying the next coat. Let the final coat dry for four to six hours before handling it.
Instructions
1. Sand in the dent and up to Three inches sorrounding it with 220-grit sandpaper. Remove all of the distemper from the surface, down to the primer or plastic surface of the bumper.
2. Application 380-grit sandpaper to sand the nature again. Smooth the sanded area with the 380-grit sandpaper so that it isn't as Rugged as the Stop left by the 220-grit sandpaper.
3. Blend the oppose filler and hardener on a palette such as a portion of cardboard. Applicability Sufficiently filler to fill the dent twice. Add a dwarf size of hardener and combine the two with a plastic squeegee. Squirt a thick, one-inch borderline of hardener elsewhere of the tube for every golf ball sized immensity of filler. Whether the filler amounts to three golf balls, benefit a three-inch wrinkle of hardner. Combine until the filler is a solid colour with no swirls left by the hardener.
4. Rub the filler over the dent with the squeegee. Fill the dent with filler and spread the filler away to involve most of the sphere that you sanded. Let the filler dry for an period.
5. Sand the filler with 220-grit sandpaper on a sanding block until the filler is smooth and flat with the surrounding surface of the bumper. Amass the sanding block flat against the surface of the bumper and lead with a long edge of the block, even if the dent is on a corner or edge. Follow the body lines of the bumper.
6. Go over the filler with 380-grit sandpaper on the sanding block to smooth the scratches left by the 220-grit sandpaper. Wipe the area with wax-and-grease remover and a microfiber towel. Place masking tape and paper around the repair so you won't get overspray from paint and primer on the surrounding area of the bumper.
7. Spray primer over the areas with filler. Let the primer dry for Thirty minutes. Spray a total of three coats of paint over the dried primer.Plastic bumpers are used on the front and rear of most latest cars, trucks and SUVs. The plastic is Supple Sufficiently to withstand most babe dings, on the other hand a concentrated Sufficiently buffet can freedom a dent in the bumper. A modern plastic bumpers costs indefinite hundred dollars, plus the value of materials and labour to whitewash it to match your vehicle. The most inexpensive plan to repair the bumper is to remove a dent in your plastic bumper yourself.
