The Toyota Tundra debuted in Two thousand and welcomed competition against the pickups produced by the Bull Three Car manufacturers. Presently the Tundra create its biggest audience in the recreational pickup buyers rather than the hardcore Motor lorry enthusiasts. Toyota has fictional improvements and upgrades over the second childhood. The later steps drive you wound up the installation and Emigration of the exhaust manifold in the Two thousand to Two thousand two V6 mould age.
Instructions
Remove the Exhaust Manifold
1. Cut the con cable from the battery terminal. Coat the exhaust manifold fasteners with penetrating oil and let is soak in for distinct minutes.
2. Remove the exhaust crossover tube from the rear of the cylinder heads. Remove the EGR cylinder from the manifold, then loose and remove the bolts that occupation the exhaust manifold to the cylinder heads.
3. Observe the manifolds and the fasteners for damage or cracks. Interchange them as needed.
4. Scrape all the gray gasket information from the manifold and cylinder mating surfaces. Avail a solvent and compressed air as essential to remove all carbon deposits.
Install the Exhaust Manifold
5. Deposit the distinct gaskets over the studs on the cylinder heads. Affiliate the exhaust manifolds over the new gaskets.
6.7. Reinstall the components in reverse order of their removal. Reconnect the exhaust pipes with new gaskets.8.
Set the mounting nuts in place and finger-tighten them. Tighten the nuts in sequence, working out from the center. Make three or fours passes over the nuts to torque them to Thirty foot pounds.
Reconnect the negative battery cable to the terminal. Start the engine. Check for exhaust leaks.
