Replacing your inventory filter with a Wix Filter is a manner up in improving the performance of your vehicle. The Wix filter is designed to grab and dominance all the sediments and debris corsing buttoned up your fuel lines. Wix filters are hackneyed for their high-quality interpretation and faculty to direct unwanted debris from polluting your engine. Replacing a Wix filter is as not difficult as changing the senile with the advanced. Clinch you shop for a Wix fuel filter coterminous eternity you are ready to tune up your fuel manner.
Instructions
Wix Cartridge Applications
1. Set the fuel filter. The fuel filter is generally located underneath the frame rail. Follow the fuel line running from the tank to locate it.
2. Disconnect the fuel lines from the filter. The inlet and outlet lines will have quick-connect fittings that require unsnapping to remove.
3. Loosen the mounting bracket with a socket wrench to remove the mounting bracket. The filter will fall freely as the bracket is loosened.
4. Install your Wix filter to the mounting bracket. Tighten the mounting bracket till the filter is snug.
5. Install the inlet and outlet lines. The quick connect fittings will snap as you place the lines over the filter piping.
Spinoff Filter Applications
6. Locate the filters underneath the hood. The filters are located by the fuel injection system. There is generally a primary and a secondary filter.
7. Unscrew the filters with a filter wrench. Turn the filters counterclockwise to remove.
8. Fill the Wix filters with fuel. Ensure the filters are topped off, because you do not want any air in the lines.
9. Dab motor oil on your fingers. Spread the motor oil around the black gasket on the surface of both of the filters. Ensure that the filters are snug to the fuel filter assembly housing by turning the filters by hand till they will not turn anymore. Do not tighten with a wrench.
This will ensure the filters are easier to remove when you have to replace.10. Tighten the Wix filters to the fuel filter assembly.
