8. Remove the screw holding the ignition lock cylinder to the steering column using a screwdriver.9. Pull out the ignition lock cylinder, then push the new one into place.
Instructions
1. Exposed the hood of your Malibu and disconnect the cables from your battery using a box wrench or socket.
2. Remove the four screws holding on the trim covers. This can be done with a screwdriver.
3. Pull the pad off the steering trundle, then disconnect the wire connectors on the back of the pad. They Testament pull off by artisan. Establish the pad aside.
4. Remove the goodly aficionado in the centre of the steering wheel with a ratchet and socket.
5. Benefit a steering revolve puller to remove the steering wheel.
6. Unplug the wire connectors from the steering wheel.
7. Remove the lock plate that was behind the steering wheel with the steering wheel puller.
Breaking the ignition important cylinder in you Two thousand five Chevrolet Malibu isn't strenuous to bring about. Habitually turning it further dense, breaking a decisive off in the cylinder, or facile wear and tear can act it. When this happens, replacing the ignition lock cylinder is your doctrine. While attempting this repair may seem daunting to a novice do-it-yourself mechanic, it's not as bothersome as it appears.
10. Reassemble the steering wheels by following the directions in reverse.
