Friday, September 18, 2015

1999 Dodge Dakota Glass Installation Instructions For That Doorways

10. Put the channel bolts back and tighten with a Torx wrench. Push the weather stripping back into place and reinstall the speaker.



Instructions


1. Pop up the hood and remove the adverse battery cable by loosening the fan on top with a wrench.


2. Involve a hooked thing into the gap ultimate the window Eccentric person to detach the clip for guidebook windows. For ability windows, pry up the trim panel with a trim stick and unplug all electrical connections.


3. Unscrew the screw extreme the stock with a Phillips purpose screwdriver. Remove the screws attached to the trim panel with the screwdriver.


4. Pull up on the trim panel and unplug the electrical connections last it.


5. Peel off the plastic shield persist it very carefully so that it doesn't tear.


6. Unscrew the screws attached to the door speakers and remove the cover and speaker from the door. Unplug the electrical connectors behind the speaker.


7. Pry up on the weather stripping at the top of the door using a flathead screwdriver.


8. Detach the bolts on the window glass run channels using a Torx wrench. Remove the bolts behind where the old window was using a socket wrench.


9. Put the new glass into the door into the channel and position it within the regulator. Reinstall the nuts with the socket wrench to hold the glass in place.


Install glass in the doors of your Dakota.Provided the glass in your 1999 Dodge Dakota becomes damaged, you Testament must to install recent glass within the door itself. Further obtaining the fair extent glass, you blameless want a meagre basic tools that can be endow at your resident Car parts store. To install glass in one door should yield you approximately an time to achieve after you posses already had the ancient glass removed.


11. Reverse the above steps to put the door back together.