The headlight meeting for a 2000 Accord houses the front headlights and turning expression lights. The 2000 Accord, unlike some vehicles, does not desire you to pocket money the meeting in circuit to convert the headlight bulbs. Unfortunately, removing the meeting itself provided you inclination to modify it is actually a employment. The front bumper has to be removed, with a legion of bolts and clips to boot. The beneficial counsel is that the chore is quite straightforward, and with the helping hand of a classmate to grip the bumper shouldn't cut bounteous than an afternoon.
Instructions
1. Turn off the Two thousand Concur and pop the hood.
2. Remove the two backside bolts on either site of the front bumper.
3. Remove the six backside clips below the bumper. Subsume the Apartment lodgings objective of a flat-head screwdriver below the mind of the clip and the mating surface and pry the clip off. Repeat this course for all the clips.
4. Remove the five retaining clips on top of the bumper, including the ones near the grille. Perform the same procedure on these clips that you used to remove the bottom clips.
5. Unscrew the two screws holding the side of the bumper to the Accord, and with your friend, move the bumper off of the vehicle. Pull the assembly straight out of the cavity.8. Install the replacement assembly by mounting it in the empty cavity with the five bolts you removed earlier. Connecting the wiring harness and reattach the front bumper.
Lay the wiring harness aside.
7. Remove the five bolts on the perimeter of the headlight assembly and set them aside. Place the bumper on a blanket or another soft surface to avoid scratching it.6. Reach into the engine compartment through the open hood and disconnect the wiring harness at the rear of the headlight assembly.
