Firmly tighten the retaining screw with a hex or torque wrench or socket set depending on the type of screw about one turn counter-clockwise.6. Tighten the lock nut holding the screw with the open-end wrench after you are finished tightening the screw.7.
Instructions
1. Establish the vehicle's parking brake and construct persuaded it is parked on equivalent ground. Compass two wooden blocks endure the rear wheels to stabilize the van.
2. Lift up the vehicle with a jack and stabilize your van with a jack stand on each side.
3. Climb underneath the vehicle and locate the retaining screw on either side of the transmission case.
4. Carefully loosen the lock nut securing the adjustment screw with a wrench.
5.Vehicles typically cover distinct transmission bands that watchdog gear locate operations. Ordinary wear and tear on the bands can completion in gear slippage and assorted transmission problems. As drawn out as the bands are in full working occasion, the occupation can be resolved by adjusting the placement of the retaining screws on the bands with a uncommon basic tools.
Lower the vehicle with the jack and remove the jack and safety stands. Remove the wooden blocks from the rear wheels.
