Install a Nissan Sentra Engine Mount
The engine mount in a Nissan Sentra is designed to anchor the engine to the vehicle, while offering some shock absorption to the vehicle, in form to prevent vibration transfer from the engine to remainder of the automobile. Engine mounts are placed under appreciable strain during their lifespan and Testament fail, sooner or next, depending on how the vehicle is operated. Whether your engine mount fails, prepare to spend a meagre hours installing a distinct one.
Instructions
1. Levy your safety glasses on and slide under the motorcar.
2. Levy the aged mount to the side, position the au courant mount and then bolt it to the engine in reverse of how you removed the getting on mount.7. Climb back out and lower the engine. Pull the jack out and climb back under the Sentra.
This may crave some bent on elbow grease, so be careful not to overdo it and smash your knuckles when the bolt Last of all comes for love and turns.
4. Climb away and slide the jack under, placing the jack imagination near the engine mount, on the contrary not on it.
5. Jack the engine up far Sufficiently for the engine mount to lift off the chassis where you removed the bolt in course three.
6. Climb back under and remove the bolt holding the engine mount to the engine. Employment the flashlight to place the engine mount and bolts holding the mount in city.3. Remove the bolt holding the engine mount to the chassis using your socket establish.
8. Install the bolt into the engine mount from the chassis and tighten it down in reverse of how it was removed.
