The starter on your Craftsman lawnmower is express convenient thanks to it eliminates having to pull-start your lawnmower engine. The ignition on your Craftsman lawnmower is the link between the battery and starter. Over chronology the gloss pins and electrodes in the ignition can wear away and you Testament want to modify it.
Instructions
Push Mower Ignition
1. Unscrew the insert box environing the ignition on the handlebars.
2. Pull off the electrode cords from the ignition connectors. These cords jog to the engine starter and battery.
6. Tighten the ignition subsume back on with the socket wrench.
Riding Mower Ignition
7.Position the latest ignition in compass and tighten it down.
5. Push the electrode cords back onto the Correct connectors on the imitation of the advanced ignition.
3. Unscrew the ignition from the handlebars with the true bigness socket wrench.4.
Dehiscent the hood on the riding Hay-maker.
8. Unscrew the kernel located on the pattern of the important ignition under the Craftsman rider dashboard with the proper sized open-end wrench.
9. Pull the electrodes off the connectors on the base of the ignition.
10. Pull out the ignition from the top of the dashboard. Slide in the new ignition and tighten the nut back onto the base.
11. Slide the electrode clips back onto the proper connectors on the base of the ignition. Close the hood.
