Shocks can be replaced by yourself with no problem tools.
The shock absorbers on your Jeep Grand Cherokee should be replaced every 75,000 miles. There are clashing types of shocks for your particular Grand Cherokee, on the other hand, the installation is practically the duplicate. Shocks can be purchased online or at your district Car parts store.6. Berth the distinct shock into position.7. Straighten the mounting holes on the shock with the brackets in the vehicle.
1. Loosen the lug nuts of one of the tires with a tire iron.
2. Slide a hydraulic jack directly under the axle near the tire. Rotate the helve on the jack to lift the vehicle. Remove the lug nuts from the turn studs and pull the tire from the axle of your Jeep Grand Cherokee.
3. Establish the mounting bolts that secure the shock in position. There are two bolts, one at Everyone stop. Lubricate these bolts by spraying them with penetrating fluid.
4. Remove the bolts by placing the exactly magnitude socket onto the bolt and attaching a ratchet to the socket. Domicile a wrench on the kernel and remove the bolts.
5. Grasp the shock and pull it from the vehicle.
You Testament require to find the year and design of your Jeep Grand Cherokee to arrange the correctly shocks are purchased. Installation can be done by yourself in an afternoon.
Instructions
Slide the bolt complete the mounting holes. Attach the retaining nuts on the threaded butt end of the bolts. Dwelling a wrench on the fan and a ratchet on the bolt. Tighten Everyone bolt.
8. Berth the tire back onto the axle of the vehicle by aligning the holes in the revolve with the studs on the axle. Thread the lug nuts onto the wheel studs and tighten them using a tire iron.
9. Lower the vehicle to the ground with the jack.
10. Repeat these steps for the remaining shocks on your Jeep Grand Cherokee.
