The Town & Community's air-conditioning system uses R134a refrigerant.
The air conditioning step of the Chrysler Town & State is a sealed manner and should never leak refrigerant, unless there is a leak in the operation. When a leak or failure of the transaction occurs, the refrigerant in the air-conditioning step must be recharged. Recharging any R134a air-conditioning manner does not want a exceptional certification, unlike R12 Freon, nevertheless it does need a charging station to be trustworthy the Correct refrigerant levels are achieved. The actual charging operation is relatively mild.
Instructions
1. Emptied the Town and Native land's hood and inspect on the rear of the air-conditioning compressor, the pulley-driven Element at the backside, Chauffeur's side of the engine. Hint the thicker of the two lines from the rear of the compressor until you place the low-pressure work Harbour, a metal valve sticking from the border.
2. Unscrew the plastic cap from the low-pressure advantage Harbour and attach the dejected becoming from the refrigerant charging station to that utility Harbour by artisan.
3. Hint the thinner hose from the rear of the compressor until you allot the overhaul Harbour, this is the high-pressure becoming. Connect the high pressure hose from the refrigerant charging station to the high-pressure service port by hand.
4. Set the machine to charge the system with Thirty four ounces of R134a if your Town & Country has only front air-conditioning and Forty six ounces if it has rear air-conditioning. This process varies depending on the machine used, so refer to the machine's instructions.
This process varies with each machine, refer to the machine's instructions for the specifics.6. Listen for a beeping sound indicating that the charging station has completed the charge.5. Start the town and country and turn the air-conditioning on. Open the discharge and suction valves on the charging station and begin the charging process when the machine alerts you, typically via an audible beep, that the R134a is prepared.
Close both the suction and discharge valves on the recharging station.
7. Open just the suction valve on the charging station To admit any remaining R134a in the charging machine's line to flow into the air-conditioning system. Close the suction valve.
8. Remove the charging station's lines from the Town & Country's air-conditioning lines and screw the caps back on the service ports.
9. Close the Town & Country's hood.
