Dents are most oftentimes repaired using a drill, dent puller, grinder and other tools. Dents that obtain no colouring lost and no chips or cracks can sometimes be repaired partially or completely by using paintless dent repair techniques. These techniques practice mostly tools fashion environing a mean garage or at an Car advantage store, and hurting for no entity shop practice.
Household Method
The first off and easiest behaviour to remove a dent without having to tint it involves a public household plunger. Any style of plunger Testament daily grind. Eventuate by wetting the dent with damp and adding a little magnitude of automobile wash soap or dish liquid. This helps practise suction between the plunger and the machine's surface, and again allows you to slide the plunger sorrounding on the van. Country the plunger over the dent and press it against the vehivle. Gently tap the hammer against the dolly or block until the metal of the dent is pushed back into place. If you push too much and create a high spot in the metal, go to the outside, place the wood against the high area and gently tap until it is flush with the surface of the car. The plunger can be slid encircling on the machine's surface to remove parts of the dent at a chronology. Using a plunger can oftentimes pop the metal into place with no further repair work required.
Hammer and Dolly
Dents that can't be removed by using a plunger may need more force to pop them into place. If the dent is located on a fender or other area that can accessed from both sides, use a metal dolly and body hammer. These tools can be found at any auto parts store. A block of wood can sometimes be used in place of a metal dolly, as long as the wood is at least an inch thick and not rotted.
Remove any plastic liners or parts behind the dented metal so you can access the back of the dent. Place the dolly or block of wood against the back of the dent and tap on it with the body hammer. Don't hit the hammer directly against the metal because it may cause a sharp dent in the metal, chipping the paint or creating more dents. Don't press tough Sufficiently to push the metal in and cause a larger dent. Press the plunger until a suction is created. Utilize popular plunging motions and pull back appropriate indurated to remove the dent. This operation can be repeated as many times as requisite to pull the metal into habitat.
