Then, unplug the wires from the ignition coil.3. Remove the screws securing the coil bracket to the intake manifold, using a bitty screwdriver or wrench.
1. Deal in guarded while you endeavor on your Motor lorry. Not matchless should you allot your emergency brake, you should besides disconnect your absent battery cable. For added safety, isolate the cable, so it won't adjust an unforeseen connexion.
2. Avail masking tape to honour the Glimmer plug wires according to which terminal they connect to.When you open your Chevy Silverado, the ignition coil responds to the voltage from the battery and generates the Glimmer expedient to kick commencement the Glimmer plugs. A holy mess within the ignition coil may creator an oil leak or prevent your Motor lorry from starting.
Instructions
4. Pull the Chevy Silverado ignition coil bracket gone from the manifold. To separate the ignition coil from the bracket, remove the fasteners. In many cases, these will be rivets that you need to drill and punch out.
5. Replace the old ignition coil with a stock replacement or universal ignition coil. You might want to consider purchasing an ignition coil kit, which comes with mounting hardware. This is especially helpful if you had to drill and punch the rivets in order to access the ignition coil.
6. Put the pieces back together. As you tighten the retainers, make sure you only tighten until snug. Over-tightening may strip them.
