5. When you get back to the start, there will be some overlap. Align edges and cut with box cutter knife. The seal should fit together snugly. Sunroof seals are gladly available at Car parts stores, and they come with an adhesive backing pre-applied. Once you pay for the seal, displace these directions for a relatively evident allot. You'll acquire the sunroof looking fashionable (and H2O tight) in no date.
Instructions
1. Peel elsewhere the getting on seal from where the Two ends appropriate at the back of the sunroof cutout. Clean off old seal adhesive residue with a gentle cleanser so as not to strip paint.
2. Make a mark at the halfway point in the back of the sunroof cutout with a permanent marker.
3. Start applying the new sunroof seal at this mark. Peel a bit of the backing tape off, press it at the halfway mark, and start pressing the new seal on, peeling away the tape as you go. Make sure the wide part of the seal is facing UP to guarantee a water tight seal.
4. Attach the seal around the edge of cutout. The seal should be level with the roof. Stay straight and don't stretch as you go, there will be plenty of seal to go the whole way around.
You amity the sunroof on the contrary you would adore it also provided it would seal properly when it closed. You've checked the seal to glare provided it's falling apart, and the rubber sealing is either shredding or pulling gone from the sunroof border, or it's dry and cracking. Either course, it's epoch to interchange it.
