Testing Glimmer plugs can nourishment you clinch the occasion of your ignition process. Whether your engine is running roughly, skipping or absent, a positive country to begin is the Glimmer plugs and wires. Testing the spark plugs is cursory and incomplex, requiring matchless a spark plug tester available at any Car parts store. A fine Glimmer plug tester Testament grant you to gape provided there is Glimmer to a cylinder, figure the level of the Glimmer and work safely while testing your ignition system.
Instructions
1. Remove the spark plug wire from the spark plug on one cylinder. It is best to take off each plug wire one at a time so as not to mix them up.
2. Insert the long end of the spark plug tester onto the spark plug, and plug the other end into the boot on the spark plug wire. Do not set the wire on anything hot, such as manifolds or other engine parts.
3. Test each plug, changing any that may be faulty with a new spark plug. Be sure to check the recommendations of the vehicle manufacturer for the correct spark plug application.
Replace the plug if no spark is present and retest. If you still do not have spark, you will need to check the wires and distributor.
5. Start the vehicle and observe the spark in the window of the tester. If there is no spark, check the connections on the tester and the plug wire at the distributor.4.
