Tw persons are usually required to transform the windscreen in your vehicle.
Provided the windscreen in your 1992 Dodge becomes cracked, scratched or damaged, you may get to modify the adequate windscreen. Earn advice in removing and installing the windscreen, as the magnitude and weight of the glass makes this a arduous labour for one man. Specialized tools and components are not required for this assignment, and most needed items are available in Car parts stores.
Instructions
1. Community covers on the hood of the vehicle to support protect the whitewash duty while replacing the windscreen.
2. Adoption a screwdriver to remove one of the two screws which secure the rearview wing-mirrors to each of their bases. This will allow you to slide the mirrors away from the bases.
3. Use a sharp blade to chop away the rubber seal around the edges of the windshield. Pull the seal away with your hand as you cut it.
5. Attach the new gasket to the windshield; the heavy side should be on the inside and the slit on the outside. Tie a nylon cord around the outer groove of the windshield.6.
4. Enter the vehicle, and carefully press the windshield out of the frame. Have someone on hand outside the vehicle to help support the weight of the windshield. Place a thin layer of sealant around the edges of the new windshield.
Position the new windshield in the frame. Press it in place for a few minutes To admit a seal to set. Pull the nylon cord along the frame inside the vehicle To admit the rubber lip to set in place. Clean the windshield and dashboard to prevent any debris from getting in the vents. Reattach the wing mirrors by sliding them onto their bases and reinstalling the previously removed screw.
