The longer the length of coaxial cable, the more the coaxial signal degrades.3. Use a coaxial splitter. If there is no dedicated cable outlet near the TV to which you can connect a coaxial cable, you can use a coaxial cable splitter to connect two or more TVs to one outlet.
Instructions
1. Probation coaxial cable connections. Set the wall coaxial Issue very as the coaxial input connexion on the TV that is experiencing the pathetic picture affection. Evaluation the metal connectors on both sides of the coaxial cables to cause certain they retain not come loose; tighten them provided they hold.
2. End a shorter coaxial cable. One of the most banal causes of coaxial term degradation occurs when someone uses an excessively extensive coaxial cable.
Troubleshooting expression degradation on a coaxial cable alike the one pictured is no problem and painless.Cable TV function that comes in wrapped up a coaxial cable can sometimes lose picture essence provided the cable vocable is not as bulk as it could be. There are distinct, facile troubleshooting steps you can receive on your own to essay and restore the coaxial signal to its Correct energy and boost your picture standard.Simply connect the coaxial cable coming out of the wall outlet to the input on the coaxial splitter, and run a coaxial cable cable from each output connection on the splitter to each TV.
4. Install a new dedicated cable outlet. Using a coaxial cable splitter literally splits the coaxial signal in half, so running two TVs off of one outlet may not provide enough signal strength to give you consistent picture quality on both TVs. You can have your cable provider install a new dedicated connection to one TV.
5. Use a coaxial amplifier. If none of the above steps restore your coaxial signal to its proper strength, you can use a house amplifier, a device that boosts the coaxial signal to a specific outlet or outlets in your house. Contact your cable TV provider to inquire about having a house amp installed.
