The tensioner pulley is in the front, near the center of the engine. It resembles remainder of the pulleys except that it is attached to a spring-loaded arm.3.
To prevent this, proof the girth for cracks and breaks every two to three weeks. Correct maintainance prevents in need performance.
Instructions
1. Fix the serpentine belt routing diagram near the hood Proceeds lever under the hood. Whether there is no such diagram, frame a diagram depicting the pathway the band takes encompassing the engine's pulleys, moulding decided to indicate which it goes under and which it goes over.
2. Locate the spring tensioner pulley in the engine compartment.Serpentine sashChanging the serpentine cummerbund in the One thousand nine hundred ninety six Jeep Cherokee is a leading object of maintaining the engine. The serpentine sash is the extortion that drives the alternator, the inundate pump, the potential steering pump and the fan, so a failure of the girdle could conclusion in a loss of domination and loss of battery ability, and the Jeep would overheat.
Set the socket wrench on the square peg in the center of the spring tensioner pulley. Rotate the ratchet counterclockwise to remove tension from the belt. Slide the belt off of the spring tensioner pulley and slowly release the wrench. Remove the belt from the engine.
4. Place the new serpentine belt by following the diagram. Leave the spring tensioner pulley for last. Placing the belt on the wrong side of a pulley will cause the pulley to spin the wrong way and could damage the component.
5. Rotate the wrench counterclockwise on the tensioner pulley again and place the belt on the pulley. Slowly move the wrench clockwise to return tension to the belt.
