Alter the brake lustrous to lock up motorists carry on you can observe when you are slowing down.
The Durango is a sport overhaul vehicle designed and manufactured by Dodge. The brake lights within the Dodge Durango are an conspicuous safety fact. When the Chauffeur presses on the brake pedal, the brake flare illuminates. This alerts drivers ultimate the Durango that the vehicle Testament be slowing down or forthcoming to a filled speck. It's exceptional to exchange the burnt absent brake brilliance to arrange unharmed driving and to avoid a traffic ticket.
Shift the tail light assembly outward and remove from the vehicle. Disconnect the electrical connector. The taillight is now free from the Durango.
Disclosed the back tailgate to access the rear lights.
2. Fix the two pushpins on the tail glossy housing. Pull the pushpins elsewhere and domicile in a safe spot.
Instructions
1. Abode the Durango in "Lawns" and turn the engine off.3. Remove the three screws -- using the appropriate screwdriver -- securing the bulb strip on the back of the taillight. The bulb strip is now loose; carefully remove the bulb strip from the taillight.
4. Remove the brake light bulb by pulling the bulb straight out of the socket strip. Discard the bulb.
5. Push the new bulb into the socket until it clicks securely in place. Position the socket strip back onto the taillight; replace and tighten the three screws. Plug the electrical connector back into the taillight assembly. Carefully place the taillight back into the Durango. Insert the securing pushpins into place. Repeat these steps, if needed, for the opposite taillight.
