Your Two thousand one down Two thousand five Chevy Avalanche may carry come with an anti-locking brake action, nevertheless perpetuation needs to be performed to lock up that the braking manner is useable. Alter the front CD brakes on your Chevy Avalanche to guard that the brakes are operating at the due common.
Instructions
1. Grounds the Chevy Avalanche on a Apartment lodgings surface. Assign the emergency brake on and deposit wedges persist the wheels to prevent the vehicle from rolling. Withdraw 2/3 of the brake fluid from the crackerjack cylinder, using a syringe. Remove the trundle.
2. Disconnect the caliper. Using mechanic's wire suspend the caliper from the frame. Reconnect the caliper mounting bracket bolts to the steering knuckle. Tighten the caliper guide pin bolts to Seventy four ft./lbs. on Fifteen series or Eighty ft./lbs. on 25/35 series. Reconnect the caliper.
Disconnect and remove the brake pads from the caliper mounting bracket. Remove the clips from the inside ends of the caliper mounting bracket and toss them outside. Install clips to the inside ends of the caliper mounting bracket. Install brake pads to the caliper mounting bracket.
4. Install the inner pad (one wear indicator). Install the outer pad (two wear indicators). Reconnect the caliper mounting bracket to the steering knuckle assembly.
5. Remove all traces of the original adhesive patch. Clean the threads of the bolt with brake parts cleaner or a similar product and allow area to dry. Apply a thread sealer to the threads of the bolt. Do not install the caliper mounting bracket bolts until this has been done.
6. Constitute undeniable that the caliper does not hang from the brake hose. Disconnect the caliper mounting bracket bolts. Disconnect the caliper mounting bracket from the steering knuckle meeting.3. Reconnect the tire and wheel assembly.
7. Refill the master cylinder to the appropriate level with fresh brake fluid. Pump the brake pedal slowly and firmly in order to seat the brake pads. Drive the car at slow to moderate speeds to ensure that the maintenance was performed correctly.
