Quarters a Bicycle Tire
Demand a pleasant groove to chicken feed the constitution of your bike? Alter the tires. A locate of smooth tires on your height bike, For instance, Testament award a yet faster operate on sidewalk. Tires further wear absent, Sure, and learning to change them Testament save you income. Due to tires come in many sizes, hire your senile tire with you when purchasing a replacement, to brew definite you pay for the amount condign.
Instructions
Removing the old tire
Gently roll the tire into place over the rim edge. Work slowly and avoid snapping the tire into place as this tends to pinch the tube and cause air leaks.14. Once loose, the rotate can be pulled paper.
2. Older bikes normally gain two axle nuts holding Everyone shove in area. Adoption an adjustable wrench to loosen one of the nuts, thus allowing the circle to come handout.
3. Completely deflate the tire.
4. Slide the rounded bound of one of the tire tools between the tire and the rim. Working slowly and enchanting care not to pinch the tube, pry the tire away from the rim by locking the free end of the tire tool into the spokes.
5. Slide a second tire tool between the tire and rim. Work this tool around the rim until the tire pops free (see A).
6. If the tool gets stuck, lock the free end into the spokes and begin working with the third tire tool.
7. Remove the tire and inner tube from the rim.
Installing the new tire
8. Take a new tire and slip one edge of it all the way around the rim. It should be possible to do this by hand, although you can use one of the tire tools if necessary.
9. Place the inner tube completely inside the new tire, taking care to line up the inner tube valve with the valve hole in the rim (see B). Push the tube as far into the tire as possible. It might help to inflate the tube very slightly.
10. Using your hands, push as much of the second edge of the tire onto the rim as possible. Continue pushing the tube into the tire as needed.
11. Insert a tire tool between the rim and the portion of the tire that is not yet installed.
12. Slowly lever the tool upward and force the tire over the rim edge. Use a second tool to push the tube into place if necessary.
13.1. Remove the spin from the bike. Most bikes promptly corner a quick-release lever on Everyone axle. Simply flip one of the levers to loosen the turn.
Inflate the tire to the recommended pressure written on the side of the tire, and replace the wheel on the bike.
