5. Use a socket set to remove the bolts holding the catalytic converter to the underside of your SL600. A spray of automotive lubricating grease may be necessary, if there is rust holding them in place.
Instructions
1. Insure your SL600 is air-conditioned. A vehivle that has been running heats up the exhaust action quickly, and can be extremely dangerous.
2. Jack up the rear of your SL600, and secure with jack stands. Put on gloves to protect your hands, and crawl under the passenger side of the car.
3. Locate the catalytic converter by following the exhaust pipe to the muffler, then to the engine. You will see the catalytic converter between the muffler and the engine.
4. Use an O2 wrench to remove the oxygen sensor directly in front of the catalytic converter. If your SL600 has an O2 sensor behind the converter, remove it too.
Be confident to wear glove thanks to the exhaust transaction can satisfy especial flaming.Whether there is a disputed point with your Mercedes SL600's catalytic converter, you can remove it and modify it Homewards for less than $500 (as of Feb 2011). On the other hand, it is influential to be aware that it is lawless to handle a van without a functioning catalytic converter method in district through of the damage untreated exhaust can determinant on the field. Once the catalytic converter is removed from your SL600, it must be replaced by a catalytic converter manufactured to transform the converter on your vehicle.
6. Gently move the catalytic converter back and forth with your hand. Once it moves freely, pull it down and toward the front to remove it from the muffler and exhaust pipe.
