Attention your vehicle headlight lenses Disinfected is also than aloof a argument of aesthetics--it's a safety theory, as well. Smear, cloudy headlight lenses dim and ambiguous your belief in caliginous and poor driving conditions. Clear cleaning is quite abrupt and apparent, on the other hand enormous cleaning may be a else involved action. To cleanse the cloudiest headlight lenses, you Testament committal to bring about lots of sanding and polishing.
Instructions
Slightly Dirty Lenses
1. Squirt some liquid dish soap into a bucket and add irrigate to generate a soapy sense. Call Disinfected rags to scrub the lenses with the soapy saturate. Provided imperative, adoption an deficient Toothpick for dense spots.
2. Operate a unmarried coat of plastic lens polish to the wet lenses with a dry rag. Modification the rag in brief Hand-bill motions as you exercise it, then let it dry into a hazy coating.
3. Apply the polish in a circular motion. Let it dry for several minutes until it creates a cloudy haze.11. Attach a polishing disc attachment to your electric drill or rotary sander, and buff the lenses to a clean, clear shine.
4. Squeeze some liquid dish soap into a clean bucket and fill it with water to create a soapy solution. Wash the headlight lenses as best as you can using rags, old toothbrushes and the soapy water.
5. Dry the parts of the auto frame surrounding the lenses, but leave the lenses themselves wet. When the surrounding area is dry, apply some blue painter's tape all the way around it to protect the vehicle frame during the later steps.
6. Apply a single coat of plastic lens polish to the lens surfaces.
7. Take a piece of 600-grit sandpaper and wrap it around a small wood block. Hold the sandpaper onto the block as you dip it into the bucket of soapy water. Use the wet, blocked sandpaper to sand the lens surfaces for several minutes. Applying firm, even pressure, sand in a side-to-side fashion and evenly across the entire surface of the lenses. Dip the sandpaper block back into the water every Twenty or Thirty seconds to keep it wet.
8. Switch to the 1,000-grit sandpaper and repeat the process described in the previous step. After that, repeat it again with the 1,500-grit, then the 2,000-grit and finally the 2,500-grit sandpaper.
9. Wash the lenses once more using soapy water and a rag, then rinse the suds away with clean water. Do not dry them.
10. Apply another coat of plastic lens polish to the wet lenses using a clean, dry rag. Buff outside the Dried apricot polish using a Disinfected, dry rag. Alternatively, avail a polishing disc attached to a hand-held rotary sander or electric drill to buff the lenses faster.
