Friday, July 31, 2015

Trobleshoot and fix The Starter Inside A 1993 Chevrolet 1500 Pickup

A multimeter can be used to assessment the starter in your 1993 Chevy 1500.


Provided your One thousand nine hundred ninety three Chevrolet One thousand five hundred pickup has problems starting, you might commitment to moderate the starter. Before assuming the starter is poor, nevertheless, elimination the starter before buying a modern one. Provided you are excruciating performing tests on your starter, many Car baggage store overture to race diagnostic tests normally autonomous. Phone your resident auto part store to beam provided they feeler this service.


Instructions


1. Attach a multimeter or 12-volt test light to the starter solenoid terminal. There should be a purple wire attached to this terminal.


2. Watch the multimeter or test light while a second person turns the car's ignition to begin". The meter should register the voltage or the test light should illuminate. If voltage is registered but the starter motor does not move, remove the starter from the engine.


3. If the solenoid plunger extends but does not rotate the pinion drive or does not extend at all, the motor is defective. Place the starter into a bench vise. Use a jumper cable to attach the negative terminal and the starter casing. Attach the second battery cable to the test battery's positive terminal. Apply voltage to the terminal labeled "S" for no more than Ten seconds.