Reconnect the electrical connections to the starter using an open-end wrench.5. Connect the positive terminal to the battery using an open-end wrench, then connect the negative terminal. Lower the vehicle off of the jack stands using the jack and start the vehicle to make sure that it still works correctly. In this position, the project vehicle is a Two thousand Toyota 4-Runner, on the contrary the measure is resembling for other vehicles also.
Instructions
1. Lift up the front of the vehicle using the jack and secure it on jack stands. Compose undeniable the vehicle is completely secure on the jack stands before you crawl underneath it.
2. Unbolt the antagonistic terminal from the battery using an open-end wrench, then repeat the manner with the concrete terminal. Crawl underneath the Motor lorry and unbolt the clear terminal from the starter using an open-end wrench. Unplug or unbolt the remaining electrical connections on the starter besides.
3. Unbolt the starter from the engine block using the 3/8-inch ratchet and socket. Pull it encircling the exhaust manifold and out of the vehicle
4. Slide the replacement starter into the engine bay, around the exhaust manifold and bolt it to the engine block using a 3/8-inch ratchet and socket.
The starter Engine on your Toyota vehicle has one charge: embarkation the automobile. It's a incomplex chore, as the electrical Engine is powered by the battery, and turns a splinted shaft which turns over the flywheel, mechanically starting the engine. Provided it goes gone, then your vehivle, Motor lorry or SUV won't inauguration, and you'll be stuck.
