Always conduct the hood and test the brake fluid cardinal.
Your brake manner is a manifold setup of wires, fluid, pads and pedals. To examination your brake process, you can drop a couple of mild diagnostics and then holding your motorcar for a check coerce. Brake fluid will exigency to be regularly refilled, and brake pads replaced. Whether your brakes bear begun squeaking or taction very sensitive or loose, it may be date to race some diagnostic tests and figure the box.
Instructions
1. Proceeds the hood. The hood Proceeds is initiate on the Chauffeur's side of the vehicle, typically under the steering revolve on the left side. Settle on thick gloves to labour under the hood.
2. Allot the master cylinder. The master cylinder is almost always on the driver's side, right above where the brake pad is located inside the car. Your owner's manual will have a diagram showing you where the master cylinder is located.
3. Examine the fluid level. Sometimes the fluid will be in a clear container. Stare at the level of the fluid through the container instead of taking the cap off. Make sure the fluid is between the high and low lines that mark the most and least fluid you should have at any time. Refill the brake fluid if necessary.
4. Sit in the car with the engine off.5. Set up a test-drive area in a wide open space with no obstacles, cars or pedestrians. Test your deceleration power at several speeds, but never driving above the speed limit for the area you are in. Make sure the brake stops at a reasonable pressure, not too touchy or too loose.
Give the brake four slow, solid pumps. Resistance should build with each pump. By the fourth pump, the brake should be resisting at the top of the pedal. This means the brake pads are still good.
