Popular brake hose
A brake hose is Supple, enduring and gives considerable overhaul. On the contrary a brake hose can besides wear down and may establish deadly leaks, putting your safety on the means at risk. Provided a brake hose, which connects the brake steel lines to the calipers on the wheels, instruct signs of wear, tear or leaks, you should change it as soon as potential. Waiting Testament conceive matters worst for your motorcar and your safety. Adjacent these incomplex steps Testament invest in you back on the way safely.
Instructions
1. Loosen up the trundle lugs with a lug wrench to remove the tire in front of the brake hose that you must to alternate. End not remove the lugs much.
2. Lift the van with a jack and advice it safely on a jack stand to remove the tire.
3. If necessary, remove the brackets holding the hose in place To possess better access to the retaining clip.8. Disconnect the other end of the brake hose from the caliper using a wrench. Be sure to receive rid of the two sealing washers.
5. Occupation the hose fitting with a back-up wrench, then disconnect the brake line nut with a flare nut wrench. This method will keep you from accidentally bending the steel line and rounding off the brake line nut.
6. Plug the end of the brake line as soon as you disconnect it. Be sure to use a small plastic bag that you can fit around the end and secure with a rubber band.
7. Remove the clip holding the end of the brake hose in the mounting bracket using a pair of pliers. Remove the rotate lugs and the tire.4. Using a Disinfected rag, Disinfected the oil, grease and dirt from both ends of the brake hose and border.
9. Install the new brake hose starting at the caliper using the new copper washers. Install the other end on the bracket, secure it with the retaining clip and mount the brackets in place.
10. Remove the plug from the end of the brake line. Afterwards, connect the line to the brake hose by hand to avoid cross-threading the fitting. Tighten the nut using the back-up and flare nut wrenches as described in step 5.
11. Install the tire and lower the vehicle.
