Vinyl tops carry been universal for elderliness, nevertheless when the vinyl gets ancient, it can dry and crack, forging it observe less graceful. Replacing a vinyl top on a Cadillac may seem compatible daunting ball-breaker, on the contrary it can be done by the standard backyard mechanic over a weekend.
Instructions
1. Remove all of the trim using the trim Emigration tools. There are clips that secure the trim to the motorcar and with benign prying, so be careful.
2. Pull off the vinyl top using your hands. It Testament be on there delightful tight, so it may takings some additional pulling.
3. Sand down the comprehensive rood using the 80-grit sandpaper to remove glue residue too as any additional foam from the advanced top.
4. Place the 1/2-inch precompressed foam onto the roof and section it elsewhere using a razor blade to match the shape of the roof. You'll require a sporadic disparate pieces to match the contours.
5. Spray contact cement finished the glue gun onto the foam, and then onto the roof. Once the glue sets up and gets cheesy, assign the foam onto the roof, urgent it along the design to rub out air bubbles.
6. Repeat this process on any other areas of the roof where the vinyl will be installed.10. Reinstall the trim by pushing it in place.
You want to make a gradual slope in the foam, contouring the foam to the vehicle.
8. Spray the glue onto the bottom of the vinyl top and the foam that's mounted onto the roof.
9. Float the vinyl top over the roof using the help of an assistant. Align the vinyl first by the windshield and then off to the sides and around the roof. You want to work the bubbles out of the vinyl so that it fits smooth and looks good.
Don't worry about making the corners where the foam meets up perfect, that can be tweaked in the next step.7. Sand the corners of the foam using the 80-grit sandpaper to contour the foam.
