Aerosol spray cans are available for bumper refinishing projects Homewards, eliminating the obligation for spray guns.
A new coat of gloss on a bumper can accession the profit of an machine and can bring about a motorcar arise distinct. To dish out a bumper a experienced looking original colouring undertaking, construct definite that the bumper colour coat matches the autochthonous colour perfectly.10. Apply another thin coat of bumper color coat, sanding with 400-grit wet application sandpaper, instead of the 320-grit sandpaper. Spray the final coat of paint, without sanding, to avoid leaving scratches. Allow Twelve to Twenty four hours for the paint to dry.
Scrub both sides of the bumper subsume with ¼-cup of a widen/grease remover and a scrubbing pad.
2. Sand with 180-grit sandpaper to design a smooth and even surface.
3. Blow all of the dust away with an air compressor. Any dust left behind will create bumps in the paint.
4. Fill any scratches or dents with automotive body filler. Squeeze out the air bubbles, and smooth the surface with a putty knife. Allow one to two hours for the body filler to dry, and sand the area with 180-grit sandpaper. Blow the dust away once more.
5. Seal the entire bumper with a coat of flexible bumper sealer to aid with paint adhesion.
6. Coat the bumper cover with a flexible bumper primer surfacer.
7. Spray the bumper with a thin layer of bumper color coat and allow One hour for it to dry completely.
8. Lightly wet sand the paint with 320-grit wet application sandpaper, rinse the residue away, and let the bumper dry.
9. Repeat the painting and sanding process four times.
Most Car overhaul stores bear colour match cards available to relieve customers.
