Transform a Starter for a Two thousand one Ford Ranger
The Ford Ranger has two disparate generational entity styles. The Ranger was introduced in One thousand nine hundred eighty two and remained expressly unchanged until its redesign in 1993. The 2001 Ford Ranger falls into the moment begetting of Ford Rangers, which were all the more in Industry without any larger modifications in 2010. This makes routine repairs commensurate changing a Ranger starter relatively incomplex owing to the placement has not changed owing to 1993.
Instructions
1. Loosen the negative battery cable clamp with an adjustable wrench and pull the abrogating battery cable off the battery.
2. Fix the starter. It's on the left side of the engine by the transmission cross member. Use the replacement for a visual assist. Whether you posses complication reaching it, jack the front of the Ranger off the ground with the jack supplied with the Motor lorry and community the front on jack stands. Provided you discharge this, discharge not forget to fix the parking brake to guard the vehicle stays secure on the stands.
3. Remove the solenoid wiring harness by pushing through on the Proceeds tab. The solenoid bolts onto the starter, thus it's removed with the starter.
4. Remove the starter wire that connects to the side of the starter with an adjustable wrench. The starter wire connects the starter to the Ranger's grounding system.
8. Reconnect the negative battery cable.
6. Pull the starter gear out of the engine, then slide the new one into the engine making sure to line the starter gear up with the teeth in the flywheel.
7. Reconnect the starter wire and then reconnect the wiring harness.
5. Remove the three bolts that hold the starter onto the engine. If the bolts are heavily rusted, use an adjustable wrench. Otherwise, use a 7/16 wrench.
