Lift the engine cooling fan meeting carefully absent of the engine compartment and change it with the fresh fan meeting. Tighten the mounting bolts to clout the distinct assembly in place.4.
2. Unplug the fan's electrical connector, then loosen and remove the bolts holding the engine cooling fan in domicile against your vehicle's radiator. District the bolts in a bantam container to prevent them from getting disappeared.
3.
A novice can modify the engine fan in a Nissan Sentra in approximately an time, using petty deeper than a wrench and a screwdriver.Instructions
1. Disconnect and isolate the negative battery cable on your Nissan Sentra, then remove the radiator energizing damper.Plug the engine cooling fan's electrical connector back into place, reinstall the radiator dynamic damper and reconnect the negative battery cable.
5. Start your vehicle's engine and check for coolant leaks, then verify that the engine cooling fan is operating properly.
