Broken parts can be welded in an emergency by using machine batteries.
Arc welding is the step of joining two pieces of metal well-adjusted under diligent heat. An electric arc strikes the Seam between the two pieces, creating a pocket of molten metal. A seperate plenty of metal, called a welding rod or filler rod, is melted into the Seam, fusing the two pieces calm.3. Area three batteries hard by to Everyone other. Attach on long jumper wire to the certain terminal of Battery One and attach the other neb to a solid metal contact mark on the vehicle.
2. Bag the string to smooth jagged edges and burrs near the spot to be welded. Benefit the emery cloth to remove stain, rust and grease from the surrounding field near the Seam.
In emergency situations, when off-road and miles from aid, bag filler rod and automotive batteries to weld a broken suspension, frame or much a propel shaft.
Instructions
1. Secure the vehicle to deal in it from rolling or falling on you while you functioning. This connexion is the ground.4. Attach a short jumper wire from the negative terminal of Battery One to the consummate terminal of Battery 2. Attach the other short jumper wire from the antagonistic terminal of Battery Two to the persuaded terminal of Battery 3.
5. Attach one end of the second long jumper wire to the negative terminal of Battery 3. Clip a 1/8-inch welding rod to the other end of the long jumper wire.
6. Put on the welding gloves and welding mask. Place the two broken pieces to be welded approximately 1/16-inch apart. Touch the tip of the welding rod to the joint to initiate the arc. Weld the joint by moving the welding rod along the joint.
