All One thousand nine hundred ninety three Jeeps came guideline with a works alarm. While the alarm does its connection deterring machine thieves, you desideratum to disable it should you lose your alarm solution fob or committal to install an aftermarket alarm. Happily, the formation can be done in a argument of minutes, as far-reaching as you keep the tools you desideratum.
Instructions
1. Place the important into the lock on the Chauffeur's side door and turn it to disable the alarm.
2. Use a wrench to loosen it just enough to slide the wire around it and wrap the opposite end of the wire around the bolt. Re-tighten the bolt to ground the wire. This disables the alarm entirely.6.
Exercise the screwdriver to pry off the kick panel on the Chauffeur's side of the Jeep. Boast the purple and gutless wire. This is the wire to the alarm.
4. Bag wire strippers to strip gone a cramped portion of the wire without cutting through it. Strip both ends of a spare electrical wire and wrap one end around the exposed section of the purple and yellow wire. Use wire crimpers to secure the wire and then wrap the entire area with electrical tape.
5. Look for the metal bolt closest to the wire. Lift the hood of the Jeep. Application a flathead screwdriver to pry the rejection battery cable from the terminal. Establish it aside, manufacture persuaded it isn't touching any metal.3.
Replace the kick panel. Restore and tighten the negative battery cable to its terminal and close the hood of the Jeep.
