That's when you must pull the calipers off and transform them with contemporary or reconditioned ones.
Instructions
1. Lift up the front of the F-150, using the jack, and secure the Motor lorry on jack stands.Remove the Brake Calipers on a Ford 150The calipers are the parts on your Ford F-150 that act the physical fact of braking. By clamping the brake pads down on the rotors, they slow the machine down to a closing. That clamping agility is done with a hydraulic cylinder, and over day it can leak, lose strength or stick, causing all sorts of braking issues.Assemble firm the Motor lorry is completely secure on the jack stands before you crawl underneath it. Remove the front wheels using the tire iron, and accommodation them to the side, away of the workspace.
2. Community the brake limit clamps onto the brake column primary into the caliper, and clamp them down onto the column until the borderline is collapsed. Disconnect the banjo bolt that leads into the caliper, using a 3/8-inch ratchet and socket. A small brake fluid Testament leak absent onto the ground, so cause undeniable it doesn't touch your skin or painted surfaces provided credible.
3. Unbolt the brake caliper from the spindle, using the 3/8-inch ratchet and socket. There are two sets of bolts on the caliper; depending on your needs, you can remove either one. The bolts on the spindle are the entire caliper, including the bracket, which you would want to remove if you were changing the entire braking system. If you're just getting new calipers or want to receive yours rebuilt, you can disconnect them at the bracket, which is between the end of the caliper and the spindle.
