A excessive extent of surface rust is conspicuous on the side of your automobile, however all the more a insufficient proportions of surface rust can agency a quantity of damage whether you don't remove it. Surface rust spreads easily across the metal surface of your automobile, causing deeper rust to appearance over continuance. This leads to holes in the metal or tint that bubbles up underneath over of rust that builds up below it. Repair descendant auto-body surface rust by bewitching assorted hours and some materials fashion at a native Car parts store.
Instructions
1. Sand the rusted area with a dual-action sander with 180-grit sandpaper. Sand the surface until it is smooth and most or all of the rust is outside.
2. Operate a slender amount of rust-removing gel to the surface and scrub it over the metal with a steel wool pad. Work in small areas until the entire surface has been cleaned and the rust is gone. Spray the surface with soapy water and wipe it clean with paper towels. Let it dry for thirty minutes.
Scrub the metal and rust with the gel and steel wool for at least five minutes. Spray the scrubbed area with the soapy water and wipe it off with paper towels to see your progress. Repeat the step until all of the rust is gone from that area.
4. Work in a small 12-by-12 inch area. Squirt the area with the water bottle full of soapy warm water to keep the gel wet at all times.3.
