Peep the exhaust system for holes.4. Levy the loose boundary of a roll of exhaust patch tape Six inches in front of the gap.
The emission and sound excursion concluded a muffler that quietens the sound then ejects them fini the tailpipes remain the vehicle. Provided your vehicle is louder than accepted it is generally by reason of you acquire a gap somewhere in the metal exhaust operation. Applying a permanent exhaust and muffler tape Testament seal the gap and better the performance of your Car.
Instructions
1. Coerce the vehicle up on automotive ramps or jack it up and put it on jack stands provided you require it raised to procure access to the exhaust system under the vehicle.
2. Let the vehicle chill completely.
3. Sponge the adequate exhaust pipes and muffler off with a shop towel.Mufflers quieten the sound of spent Gauze combustion before it exits the tailpipe.A vehicle's resonance is the sound it makes as it exits the exhaust action. The exhaust action begins at the exhaust manifold which collects burned Gauze as it exits the cylinders.
Stick it to the exhaust world by pressing it firmly into place. Wrap the roll in circles around the exhaust hole while overlapping each revolution by One inch. Pull the tape taunt as you wrap it on the metal. Continue wrapping the area until it is Six inches past the hole.
5. Cut the excess wrap off with scissors and press the end on the previous revolution.
6. Drive the auto off the ramps or jack it up and remove the jack stands if you raised it.
7. Start the vehicle and let it idle for Twenty minutes. When the muffler and exhaust system warm up, the patch tape adhesive activates and forms a permanent bond over the hole.
