Troubleshoot a Function Window Engine
Window motors are erect on every machine with function windows. The window Engine is located inside the door panel. It moves the window up and down.4. Look over the window gasket to make sure it is sealed properly. The gasket is the rubber strip that is around the frame of the window.
Instructions
1. Slide a Apartment lodgings head screwdriver into the include over the top of the window switch. Step the screwdriver underneath and pull up to remove the embrace. Loosen all of the screws holding the door panel in put with a Phillips imagination screwdriver and allot them aside.
2. Slide a pry bar between the door and the door panel. Fall it along the inside of the door panel and snap off all of the clips holding the panel in settle. Pull up on the door panel and remove it from the door.
3. Peel off the plastic weather shield covering the full inside of the door and place the Engine near the backside of the door. Treasure trove absent if there is an electrical problem. Follow along the wires on the motor to see if everything is connected. Check for damaged wires. Inspect the fasteners to make sure they are all tight.
After oldness of capitalization, the window motor cam develop into damaged and worn down. Provided your window is Stirring almighty slow or is getting stuck, then there could be a count with the window Engine. The antecedent operation toward fixing the window Engine is to treasure trove away what the exact poser is with the window. Run a flat head screwdriver through the gasket and clean out anything that may be in the way of the window. Make sure the gasket is not loose or torn and add super glue to repair the tears.
5. Check under the fuse box for a blown fuse. Pry open the box located under the dashboard with a flat head screwdriver and check the fuses in the box. Look for blown fuses that could be causing the motor not to run properly.
