Once dry, apply a second coat. Allow the primer to dry for Twenty four hours before applying automotive paint. The correct color for the vehicle will be on a sticker on the door frame or under the hood of the vehicle.
1. Allot a instruction for your vehicle. Online auction sites are a agreeable source for older automotive manuals. These manuals count erudition on the inner workings of a vehicle, troubleshooting, and parts preservation.
2. Inspect the vehicle inside and outside. Distinguish lacking parts such as gauges or knobs, nuts, bolts and lights. Commit to paper the missing parts on a abundance of paper.
3. Remove all components of the engine bay, including the transmission and operate train. See them for missing parts and transcribe the parts you itch to alter. Compel wash all of the parts and clean them with degreaser. Exchange any rusty nuts or bolts. Tighten everything after you include cleaned it.
4. Aligning any parts that devoir to be replaced or are lost. You can normally pride parts from a classic motorcar parts dealer. Provided you conclude not get such a dealer locally, search for the parts online.
5. Disinfected the interior of the vehicle using gentle dish soap. If the older seats are made of leather and are salvageable, use a leather conditioning gel to clean them. Cover all vinyl surfaces with automotive protective cleaner.
6. Replace any internal gauges or knobs that are missing.
7. Remove the door panel and replace any broken glass with new glass.
8. Wash the exterior with dish soap and water, including the wheel wells and undercarriage. Dish soap will not leave a film. Pressure wash rusted areas.
9. Sand the paint on the outside of the vehicle using sandpaper. Start with 1000-grit sandpaper and work your way down to 36-grit sandpaper. Buff down any rust and repair with thin metal sheets.
10. Cover the headlights, wheels and windows of the vehicle with plastic sheeting to protect it from the paint.
11. Apply automotive primer to the entire car using an airbrush machine.
Between One thousand nine hundred fourty nine and 1951, Ford vehicles essentially stayed the duplicate. This makes finding the available parts easier than provided the autos had changed dramatically during those caducity. Provided you system to restore your 1950 Ford, supervene a scarce straightforward directions to make certain the employment is done good.Instructions
If the sticker is missing, contact you local Ford dealership to find out the correct paint color and where to purchase it.12. Apply clear coat to the outside of the vehicle using an airbrush machine, once it has dried.
13. Remove plastic sheeting and replace any headlights or taillights that are broken.
14. Replace all of the fixed and cleaned components of the engine bay back in the car in the reverse order of removal. Test drive the vehicle to see if it runs properly.
