While the Audi A4 comes with a high-quality works stereo action, you may desire to add your own stereo or a DVD receiver. To install your stereo, you must remove the inventory stereo. This can be done easily and requires apart one inexpensive factor. In minutes, you can get your stereo disconnected and be ready to wire your aftermarket receiver.
Instructions
1. Invest in audio Emigration keys at machine audio dealers or from diversified Internet dealers. The place Testament cover four keys.
2. Encompass one explanation between the top of the stereo and the housing--an inch from the left corner. Involve a moment explanation, extremely on the top, an inch from the due corner.
Simply press in the tabs and pull out the harness.
Push all four key handles toward the outside of the radio. The two keys on the left will be pushed left--the two on the right will go right. This will release the clips that are holding the stereo in place.
5. Carefully pull the keys out. The stereo will come out with the keys. If for some reason the stereo doesn't come out on the first try, you may need to reinsert the keys and try again, as they may not have engaged the clips.
6. Disconnect the wiring harness from the back of the stereo.3. Subsume a material between the backside of the stereo and the housing--an inch from the left corner. Encompass the Ending primary under the bottom of the stereo an inch from the right corner.4.
