6. Country the coolant void pan under the Jeep below the radiator neck.7. Start the engine to the Jeep and allow it run until it reaches operating temperature.
Instructions
1. Expanded the hood to the Jeep and then slowly frank the radiator cap. To Proceeds the cap, push down on it and then turn it counterclockwise when the engine is brumal.
2. Remove the cap to the overflow coolant reservoir.
3. Compass a funnel into the radiator neck and add 50/50 blend of coolant. Jeep recommends ethyl glycol-based coolant with corrosion inhibitors. Be positive not to add straight coolant. Rupture it down with distilled drool or shop for pre-mixed coolant.
4. Pour the coolant slowly into the funnel and grant it put in the radiator. Add and as compulsory until the coolant is ethical below the overflow tube of the radiator neck.
5. Remove the funnel and abode it in the opening of the overflow reservoir. Fill the reservoir to the adequate "chill" column stamped on the gone of the reservoir.
Add Antifreeze to a JeepAdding coolant to a Jeep is tool of an salient maintenence procedure for the vehicle. While changing the coolant every couple of senescence is still added earnest, adding to the radiator or overflow reservoir is crucial to guard Sufficiently coolant is ad hoc in the cooling action. After day, the ethyl glycol-based coolant with corrosion inhibitors (called HOAT, for Hybrid Biological Additive Technology) can breach down and lose its chemical properties.Do this with the radiator cap off to bleed any air pockets that may have entered the radiator during the filling process. This step is not necessary for the radiator if it did not require less than 1/4 gallon of antifreeze mixture.
8. Allow the air bubbles to purge from the coolant tank (if required). Coolant will purge from the neck of the radiator. Keep an eye on the alignment of the coolant drain pan. Any coolant that spills from the radiator onto the ground should be rinsed away with a water hose.
9. Add coolant to the radiator as necessary during the air bleeding procedure.
10. Replace the cap to the radiator on the Jeep and then drive it for Fifteen to Twenty minutes. Allow the engine to cool down (approximately two hours) and then reopen the radiator cap. Add more antifreeze to the radiator and reservoir if necessary.
