Unsafe, jagged spots behind left at the end, presenting a safety hazard and threatening the vehicle's structural incorruptibility. Rust damage can extremely conceive a machine exacting to sell.
Instructions
1.Remove Rust From Car WhitewashA rust spot on your machine can detract from its appearance and effect lingering damage. What began as a cosmetic matter can turn into a structural one. In generation, rust can eat terminated emulsion and metal, causing pieces of the van intent to fall off.Convenience an electric hand-held grinder with a One hundred fifty grit sanding circle to remove rust from your automobile. This Testament calm the rusted nature with the surface sorrounding it.
2. Remove the One hundred fifty grit sanding circle from the electric hand-held grinder and attach a metal grinding trundle. Slowly employ the metal grinding circle to the rusted environment to remove the rust from your automobile. This manner should as well remove dings and dents from the nature. Turn off the grinder and sponge down the area with a clean cloth.
3. Use a piece of One hundred fifty grit sandpaper to sand the area by hand. Continue sanding until the formerly rusted surface is completely smooth. When you are done sanding you should be able to shut your eyes, run your fingers over the sanded area and not feel any difference between it and remainder of your car.
4. Repair any remaining dents or imperfections with auto body filler, which you can purchase at most auto parts stores. Allow the body filler to dry overnight and sand it with One hundred fifty grit sandpaper until it is smooth to the touch and completely level with the surrounding surface area.
5. Mark off the area you plan to paint with blue painter's tape. Apply a thin layer of auto primer paint to the affected area. You can purchase primer paint from most auto parts stores. Allow the first layer to dry for 10-15 minutes. Apply three more thin layers of primer paint. Allow the primer paint to dry overnight.
6. Apply three thin layers of auto paint in the same manner as the primer. Remove the tape and allow the paint to dry completely overnight.
7. Wax the area you just painted to protect it from future rust damage.
