Babe shallow scratches and pitting are nearly inevitable with any windscreen, including your Mustang windscreen. Scratches can betide during the general method of driving, caused by blown sand or other debris. Often a dry or defective windscreen wiper is the culprit. Regardless of the engender you'd commensurate the scratches away. Scratches are not one a cosmetic annoyance, on the other hand under undeniable lighting conditions scratches can still be a likely danger. While buffing gone shallow scratches is not terribly challenging, you should angle on spending a right size of day working on it. While it is feasible to buff away diminutive and shallow scratches by labourer, this article is going to assume that you own (or hold rented) a buffer or that you gain attached a buffing pad to your electric drill.
Instructions
1. Use moderate pressure. Stop just before the paste is completely dry.5. Wipe the area with a damp cloth and allow it to dry.
Mix just enough water with your jeweler's rouge (available at most glass shops) to form a paste just slightly thicker than pancake batter.
3. Spread the paste on and around the scratch.
4. Turn your orbital buffer or drill to low speed and buff the area of the scratch. If you're using a drill be sure to keep the pad moving. Wash your window with a brew of One stuff of ammonia to Four parts of roasting bathe. Rinse and dry with a cotton towel.2.
6. Inspect the glass. If the scratch remains then repeat the process. Depending on the depth of the scratch the process may have to be repeated several times until the scratch is gone.
7. Lightly buff your entire windshield with 0000-grade (4 zeros) non-abrasive steel wool. Rub the entire windshield lightly with the steel wool, either using a circular motion or a combination of straight and circular motions. Wash your windshield with a mixture of Four parts of water to One part of ammonia and rinse.
