Arm rests may be removed and reattached with some cursory steps.
Automobiles come equipped with seats for drivers and passengers. Many of these seats appliance armrests that fold up and down for utilize in either Chauffeur or passenger areas. Some armrests are designed to be removed via a connecting pin or bolt, typically abstruse under the cushioning and upholstery of the Stool. Provided removed, the armrest can be reattached to the seats, giving the passenger an added even of consolation.
Instructions
1. Unzip the suede or other upholstery attached to the armrest. Push back the cushioning at the inside, back path of the armrest. Establish the connecting pin housing or the bolt connector.
2. Levy the proper-sized socket onto the ratchet and turn the ratchet mechanism so it turns to the hold up.
3. Establish the connecting gap for the armrest on the van seat, typically form either at the seat column or on a center console. Align the armrest bolt to the center console hole or the seat hole, depending on what your car has for attachments.
5. Push the cushioning over the bolt or pin and zip the upholstery back onto the armrest.
4. Tighten the bolt onto the attachment hole with the ratchet. If the armrest uses a connecting pin versus the bolt, slide the connecting pin into the hole and wait for the locking mechanism to click it into position.
