1. Bias how great the group of conduit needs to be including the bend. An ideal would be measuring from the ceiling (where the conduit turns down Ninety degrees) to the top of the box you are beguiling the conduit to. This length is called the stub length.
Adding connectors for Everyone Seam or turn in conduit is not authentic economical and is epoch consuming. Using a conduit bender is an easier meaning. This Slogan takes a cramped experience, however once mastered it saves a piece of day and eliminates the demand for buying conduit connectors.Instructions
2. Objective your conduit, measuring from one speck of the main, at the stub length distance.
3. Boast the accept up length for your particular conduit. 1/2-inch EMT has a appropriate up of Five inches, 3/4-inch EMT or 1/2-inch laborious conduits gain a takings up of Six inches, 1-inch EMT and 3/4-inch rigid both acquire an 8-inch take up, and finally One 1/4-inch EMT or 1-inch rigid both have an 11-inch take up.
4. Make a mark that is the take up distance back towards the end from which you made your first mark. You now have two marks, the second mark being closer to the end you started from than the first mark.
5. Place the bender in your hand with the side the lip is on touching the ground. Place the lip underneath the pipe at the take up mark you made with the footrest of the bender on the side that is closest to your first mark.
6. Apply steady and even pressure with your foot and pull on the bender bar to start bending the conduit.
7. Stare at the bender as you are bending and notice it has degrees marks on it. Simply bend to the desired degree mark to receive the bend you want. If you test fit the bend and it does not work, then re-adjust using the bender.
