Moderate the Parking Brake Cable on a Chevy Silverado
The leading parking brake cable on a Chevy Silverado Motor lorry is connected to the parking brake pedal and is routed ended to a bracket that connects the two rear cables. This leading cable is besides comprised of a front cable and an intermediate one. You must apply precision and caution when replacing a parking brake cable, as it Testament enormously influence how the parking brake works. Peel the carpet back in the truck, pry out the cable grommet in the floor pan and remove the cable from the truck.
Installation
7.1. Disconnect the Motor lorry's absent battery cable.
2. Loosen the equalizer peanut on the bracket that connects the parking brake cables underneath the Motor lorry using a wrench.
3. Disconnect the front cable from the intermediate cable and then disconnect the intermediate cable from the leading bracket. Press the tangs on the cable casing with needle-nose pliers and then pass the cable and casing nailed down the coming bracket.
4. Postdate the cable to the front of the Motor lorry and remove it from all other brackets.
5. Remove the parking brake pedal meeting and disconnect the cable from the pedal assembly.
6. The action can again vary depending on the Motor lorry's exact year, so proof with your mechanic.
Instructions
Removal
Feed the cable through the floor pan, connect it to the parking brake pedal assembly and install the cable grommet.
8. Reconnect the parking brake pedal assembly.
9. Feed the cable through all of the brackets under the truck, making sure the circular retainer is in position at the last bracket it goes through.
10. Connect the intermediate cable to the main bracket that includes the rear cables and connect the front cable to the intermediate one. Tighten the bracket's equalizer nut securely until the cables are tight.
11. Reconnect the battery cable.
